Servo Motor Used
Servo Precise Planetary Gear Reducer
-Working Temperature: The allowable temperature for a gear reducer
under the conditions of continuous and frequency can work at
-25~+90 degree working environment.
-Noise: the noise is measured under the conditions of input speed
3000 rpm, no load ans one meter distance from the gear reducer.
-Full Load Efficiency: The transmission efficiency of a gear
reducer under the maximum loading condition. It is an important
evaluation factor for a gear reducer. A gear reducer with high
-Lubrication: It's no essential to replace lubricant during the
service life of the planetary gear reducer.
-Backlash: When the input end if fixed. the output end runs
clockwise and anti-clockwise to create a +2% of the rated torque at
the output end. This will result in a slight angular displacement
at the output end, which is called as backlash unit in arc-min.
(one sixtieth of a degree).
-Rated Output Torque: Under the rated loading and long time running
conditions, the allowable output toque for a gear reducer the
maximum output is the double of this value.
-Average: Service life: Under the rated loading condition the
continuous working time for a gear reducer running at the rated
-Stage: The sun gear and planetary gear forms an independent speed
reduction gear transmission. If the there is only one gear train in
the gear reducer, it is defined as one stage transmission. In order
to achieve higher speed reduction ratio, multiple stages
transmission is required.
Standard TypeRight Angle Type